Looking for Distributors

H2 Final filter ® your
sulfur pollution solution©

learn
1
“An Ounce of Prevention Is Worth A Pound Of Cure”
Sulfur in your gas reduces performance and
shortens the lifetime of your investment
2
SAE J2719:2020 “Hydrogen Fuel Quality for Fuel Cell Vehicles” sets the standard
For volatile sulfur compounds the maximum permitted
concentration is 4 ppb, the lowest of all contaminations
because of the 100% correlation between the catalyst
poisoning sulfur concentration and the performance
and lifetime of the catalyst.
3
The H2 FINAL FILTER® REDUCES NOx & SULFUR TO BELOW 1 ppb
With 30 times more capacity than the competition!
Because you deserve the best
picture of the final filter of different sizes
Buy and use the h2 Final Filter® to:
Protect Catalysts, Instruments & Equipment with the SULFUR MAGNET™
Inside this SS316L Filter Housing with 6 mm, 1/4” or 1/8”
Swagelok compression ends
The #1 Highest Capacity, Most Tenacious Sorbent that can Reduce Sulfur and NOx
Compounds in almost any gas such as H2, Natural Gas, Air, O2, N2, etc.
To BELOW 1 ppb
Capacity exceeds 1,800 mg (1.8 grams) of H2S or equivalent
Removes H2S, NOx, AND Particulate larger than 2 Microns.
BUY the H2 FINAL FILTER® Today!
final filter graphic

WHY IT WORKS SO WELL:

The H2 FINAL FILTER® Mini-HT is engineered with all 316L Stainless Steel components and a 2-micron filter disk complete with Swagelok ends in your choice of 6 mm or ¼” or 1/8” (other sizes available on request). It contains at least 5 grams of the SULFUR MAGNET™ the World's most tenacious, high capacity, water insoluble and safe to use sorbent. Place this filter in your fuel line after the fuel tank and pressure regulator to remove the impurities the tank, regulator, and fuel line introduce into the fuel just like the fuel filter in a petroleum powered motor cleans the fuel just before injection into the motor. Copy success because an ounce of prevention is worth a pound of cure!

The SULFUR MAGNET™ inside the H2 FINAL FILTER® Mini-HT has the highest capacity for removing sulfur of any commercially available sorbent and also removes NOx and other impurities. The capacity is dependent on the concentration of the impurities according to this table:
H2S conc. in gas Liters Cubic meters Cubic feet
1,000 ppm 1,410 1.4 49.8
100 ppm 14,000 14.1 497.9
10 ppm 141,000 141 4,979
4 ppm* 352,500 352.5 12,488
1 ppm 1,410,000 1,410 49,794
100 ppb 14,000,000 14,100 497,937
10 ppb 141,000,000 141,000 4,979,368
4 ppb** 352,500,000 352,500 12,488,420
1 ppb 1,410,000,000 1,410,000 49,793,680

*4 ppm is typical of natural gas

** 4 ppb is the current standard for fueling station hydrogen.

The SULFUR MAGNET™ chemically traps the sulfur as a water insoluble compound that can be recycled, regenerated, or safely disposed of in a land fill. There are no Department of Transportation restrictions on the transportation of the virgin or spent SULFUR MAGNET™ purification media.

The SULFUR MAGNET™ is available in bulk in a variety of grain sizes, or packaged in the ready to install H2 FINAL FILTER®.

let's talk

If you want to learn more about the product or what we do, pleaes do not hesitate to contact us.
Once you submit your information, we will reachout as soon as possible.